MGI JETvarnish 3D 52L (B2)

Palaiko B2 formatą

Skaitmeninis UV padengimas/dengimas karšta folija, 2D/3D efektai
Sukuria įspūdingus taktilinius spaudinius
Sukuria blizgios folijos efektą ant skaitmeninių ir ofsetinių spaudinių
Puiki registracija su AIS SmartScanner
Personalizavimas naudojant kintamų duomenų folijavimą
Diferenciacijai ir pridėtinei vertei

Dalintis

Savybės

Išsiskirkite iš kitų

Jei norite išsiskirti savo spaudos paslaugomis, rinkitės MGI JETvarnish 3D 52L - tai idealus sprendimas skaitmeninės ir ofsetinės spaudos paslaugų teikėjams. Paverskite paprastus spausdintus darbus patraukliais spausdiniais, išryškindami norimas vizualo vietas arba pridėdami taktilinius 3D efektus su mūsų skaitmeniniu taškiniu UV padengimo įrenginiu MGI JETvarnish 3D 52L. O derindami jį su linijiniu karštos folijos moduliu, pasieksite dar efektingesnę apdailą ir spausdinius papuošite blizgančia folija.

Specifikacijos ir atsisiuntimas

Specifikacijos

Printing technology	MGI’s exclusive inkjet engine technology Drop-on-Demand (DOD) inkjet application Piezoelectric printheads in single pass printing Flexible and scalable architecture
Variable coating thicknesses	Depending on your file and the substrate used, the coating thickness can vary from a traditional flat spot UV coating of 7 μm up to 232 μm for 3D raised texture effects and a tactile finish.
Production speed(1)	Up to 3,123 B2 sheets size per hour (flat spot UV coating or 2D)
Registration	Left and right motorized registration side guides. Automatic registration using the built-in AIS SmartSanner technology for real-time management of entire sheet. No registration marks required. Overall registration of ± 200 μm.
Managed paper formats(2)	Min.: 42 x 29.7 cm / 16.5” x 11.5” (A3 in landscape mode) Max.: 57 x 120 cm / 22.4” x 47” 75 x 120 cm / 29.5” x 47”
Printable width areas	54 x 118 cm / 21.3” x 46.5”
Substrate thickness(3)	Min.: 135 gsm and not less than 150 μm / 6 mil before printing and lamination Max.: Up to 600 gsm
Substrate compatibility(3)	Enhancement on most matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastic, PVC and other coated materials. Spot 3D coat directly onto most digital prints.
UV coatings and capacity	coating tank for both 2D and 3D applications. One high-capacity tank of 18 liters. “On-the-fly” tank changeover possible during production without any interruption or waste.
Automatic sheet-fed feeder	High-capacity feeder able to handle a paper pile up to 60 cm / 23.6” high for 57 x 120 cm (22.4” x 47”) sheets. Approximately 4,000 sheets at 135 gsm.
Pallet stacker	High-capacity stacker able to accommodate stakes up to 60 cm / 23.6” high for 57 x 120 cm (22.4” x 47”) sheets. Approximately 4,000 sheets at 135 gsm.
Paper path	100% flat paper path Vacuum feed system Air feed system Automatic double sheet detection
In-line UV dryer	“On-the-fly” drying and curing via integrated UV lamps
Front end system	Intuitive touchscreen software management suite controlled by a 27” monitor Includes functions for operators: Job cost calculator, image editor, queue manager and reprint, camera and printhead settings Dedicated controller for equipment settings and technical data Ethernet connection 10/100/1000 BT in RJ 45
iFOIL	Optional Digital Hot Foiling module application Production speed: Up to 1,750 (1) B2 sheets size per hour (or up to 25 m / 65.6’ per minute) Films: Optimization system of film consumption Film Rolls: Max. roll diameter and length: ± 30 cm / 11.8” and from 400 – 2,000 m / 1,300’ – 6,500’ of film. Up to three simultaneous film rolls on the same axis (with a minimum of 10 cm / 3.9” per roll). Two cores available: 1” and 3” Maximum surface: Hot foil substrate surface cannot exceed 57 x 118 cm (22.4” x 46.5”) (4) Embossing: 3D hot foil raised effects. The surface of the metallized film may be covered with a layer of varnish or another foil
Other options	Corona (5) (6) substrates treatment module: In-line system made to optimize varnish adhesion on complex printed substrates Pallet feeder: Supports sheets up to size 75 x 120 cm / 29.5” x 47” Pallet stacker: Supports sheets up to size 75 x 120 cm / 29.5” x 47” Variable data printing (VDP) Manage and edit files on the workstation Full variable data (text, graphic, image) for both 2D/3D spot coating and hot foiling areas Integrated barcode (1D/2D) reader system and controller Raster image processor (RIP) as an option
Maintenance and remote technical support	Daily maintenance completed in less than 10 minutes Majority of procedures are automated From cold start to production in less than 15 minutes Remote troubleshooting and support via included web video camera (high-speed internet connection required)
Dimensions and weight JETvarnish 3D 52L	Up to 12.42 x 1.93 x 1.84 m / 40.7’ x 6.3’ x 6.0’ (L x W x H) (7) Necessary clearance: 1 m / 3.3’ on four sides
+ iFOIL L	Up to ± 4,529 kg / 9,984 lbs(7)
Dry air requirements	An on-site dry air system is necessary
Electrical requirements	JETvarnish 3D: 400 V, 50/60 Hz, 32A (63A plug) + iFOIL L: 400 V, 50/60 Hz, 25A (32A plug)
Operating environment	Temperature: From 18 – 30°C / 64 – 86°F Relative humidity: Between 30 and 50% (no condensation)

The default sheet size is B2 ISO (50 x 70.7 cm / 19.7” x 27.8”) unless otherwise stated.
All speeds are nominal.

(1) Speed will vary according to printing parameter used.
(2) With the pallet feeder and stacker options.
(3) Confirm substrate/lamination/toner/metallic film compatibility with Konica Minolta.
(4) Standard configuration.
(5) Require substrate above 42 cm width.
(6) Require paper above 250 gsm / 250 μm.
(7) Depending on the configuration selected.

The support and availability of the listed specifications and functionalities varies depending on applications as well as system configurations.
The stated life expectancy of each consumable is based on specific operating conditions such as page coverage for a particular page size. The actual life of each consumable will vary depending on use and other printing variables including page coverage, page size, media type, continuous or intermittent printing, ambient temperature and humidity.
Some of the product illustrations contain optional accessories.
Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
Konica Minolta does not warrant that any prices or specifications mentioned will be error-free.
All brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

The support and availability of the listed specifications and functionalities varies depending on operating systems, applications, network protocols as well as network and system configurations.
Some of the product illustrations contain optional accessories.
Specifications and accessories are based on the information available at the time of printing and are subject to change without notice.
Konica Minolta does not warrant that all specifications mentioned will be error-free.
Microsoft, Windows and the Windows logo are trademarks, or registered trademarks, of Microsoft Corporation in the United States and/or other countries.
All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

MGI JETvarnish 3D 52L brošiūra

Atsisiųskite brošiūrą ir sužinokite visas JetVarnish 3D 52L specifikacijas ir privalumus.

Atsiųsti